2. Lift the engine-transmission unit and connect · the plug-in couplings immediately prior to

2. Lift the engine-transmission unit and connect the plug-in couplings immediately prior to reaching the final installation position. a. Insert the screwed plug into the plug~n COlt- piing in a straight line. The plug must audibly engage in the holder. 370.97 3. Move engine-transmissionunit to installation po- sition and fasten. 4. Place both steering lines into the holderI lift the bow and let it engage. Check whether the holder is seated properly on the body fasten- ing point. 369-97 5. Fit enginewiringharness: b. Use special tool 9263 to check whether the a. Line up marking of the round connector with plug-in coupling was engaged properly. marking on the housing. Insert special tool 9263 into the groove (ar- row) and apply slight pressure on the special tool to check whether the connection is securely locked (holder is seated proper- ly). The plug must not slide out. If the special tool cannot be inserted in the groove of the plug, shift the plug in the plug~n cou- pling (pull on plug without using excess force). Note The plug-inconnection is designed so that the plug can be shifted in the plug-incoupling by ap- prox. 1 mm in axial direction by slightly pulling or pressing. 361 -97