fullymatted.
Back to search
997 Carrera — Turbo Engine Lid & Wing Conversion / PAGE 2

The electrical connector from the Turbo lid is plug-and-play. The wiring harness plugs right in and powers · the eRam actuators, f

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 2
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

RennKit The electrical connector from the Turbo lid is plug-and-play. The wiring harness plugs right in and powers the eRam actuators, fan and light(s). The wing will raise and lower at the same highway conditions as the stock Carrera spoiler, and it responds to the spoiler up/down button as well. It is not necessary to change the stock hinges to the Turbo hinges. A Turbo lid comes with two dampers installed with a different left-side hinge. Fortunately, a single damper in perfect health holds up the lighter deck lid (because of the lighter eRams) so there is no need to change out the left hinge to the Turbo hinge. Below are part numbers that may be needed depending upon the used Turbo lid purchase. Check other sources such as AutoAtlanta or Sunset Porsche for parts at a discount. Your local dealer may offer price matching which makes it easier to return something. • 997.512.221.00 Deck lid from an original Turbo OR 997.512.921.00 Deck lid from parts catalogs • 996.512.987.00 Adjustable bumper (2) • 997.624.056.05 Fan assembly (includes sleeves and spacers) 2

This is a source reference. Confirm exact model applicability in the original material.