At this point, all of the deck lid internals are assembled except for the ducts and wing. The ducts will be · installed just befor

RennKit At this point, all of the deck lid internals are assembled except for the ducts and wing. The ducts will be installed just before the deck lid is installed on the car. The wing will be installed after the lid is fitted to the car. Remove the OEM Carrera Lid Use high quality masking tape to protect the edges: Disconnect the electrical connector to the right of the right side hinge. Do not to pull hard on individual wires. The connector may be difficult to unplug. Push the release and wiggle / pull on the connector housing and bundle. It may be easier to press down on the spring metal release using a stubby screw driver through the slot shown below. It is a strong spring clip, but when firmly pressed, will release. The connector also has an o-ring seal that makes it tight. 10