996 Carrera Group 1 – Part 1 Engine / PAGE 81
No. Designation Qty. Removal Installation · 12 Dowel sleeve 17 M6 x 18.5 4
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Crankcase, suspension
Note:
No. Designation Qty. Removal Installation
12 Dowel sleeve 17 M6 x 18.5 4
13 Gasket. 2 Replace
14 Cylindrical pin 12 x 22 3
15 Dowel sleeve 2
16 Dowel sleeve 1
17 Closure cap 1
18 Crankcase half I cylinder 1 For disassembly,fasten to For assembly,fasten to
bank 1 -3 engine holder, special tool engine holder, special
9589 tool 9689
Assembly instructions
Separating crankcase halves
Note
"Loctite 5900" sealant is used to seal the
crankcase halves. This makes it somewhatmore
difficult to separate the crankcase halves. The
sealantcan be recognised by its "black"colour.
1. Undoring-edgebolt.
2. Undo the third fastening point on the
crankcase half cylinder 4 -6 of the engine
support, special tool 9589. 567_98
3. Use a slotted screwdriver with a tip which is
14 mm wide and 250 mm long to separate
the crankcase halves.
10 10 37 Disassembling and assembling crankcase halves 10 -53
Printed in Germany -38, 1999 9961053
This is a source reference. Confirm exact model applicability in the original material.