Engine -Crankcase, suspension 911 Carrera (996) · 14. Unclip electric cable from the air flow sensor Note

Engine -Crankcase, suspension 911 Carrera (996) 14. Unclip electric cable from the air flow sensor Note on the expansiontank of the hydraulicpump. The throttle body can be swung upward for better accessibilityto the front screw. To do 15. Undo fastening screws on the expansion this, both inner hose clamps must be removed, tank (2 M8 screws) and the hydraulic pump (3 M8 screws and one M6). Take the expansiontank with hydraulic pump and connected lines up out of the fastening bracket and set down on the right-handside. r (\) VI ~-:::-=c-- c, , " ,.;.:..:. ~~ .', .,.. -~-~-~:~.~,;,\ 061_99 c. Disconnectelectrical plug connection. Lift out compressor and set it down with the hoses connected. 059_99 18. Undo engine wiring harnesses(round 16. Disconnectbattery positive at B+ connectors with bayonet lock) on the disconnectionpoint. right side in the enginecompartment. 17. The assemblywork below must be performed on a vehicle with air conditioning: a. Removethree-phasegenerator. Refer to ServoNo. 27 22 19 b. Undothe compressorfrom the bracket(3 screws). 360_97 10 -60 100119 Removing and installing engine -GT3 9961057 Printed in Germany -25, 1999