5. Oil the bearing surfaces. Insert intermediate · shaft and check for true running.Remove

5. Oil the bearing surfaces. Insert intermediate shaft and check for true running.Remove intermediateshaft. )LJ \ ~~ 0 YO, /1 r0 i ~ '=' ~ 0 285_99 /~ i --y fA ~ 6> e 9. Check dumb-bellshaft. The dumb-bellshaft must be easily movable. If necessary,loosen -<"J-I..Y- the oil pump with the intermediate shaft and 426_99 shift the dumb-bellshaft. 6. Grease both sides of sealing ring and insert it into the crankcase half 4 -6. 426_99 10. Insert bearing shells of the crankshafts. 284_99 Insert crankshaftwith bearing 8 and mounted connecting rods into crankcase. 7. Insert the complete unit, oil pump, dumb-bell shaft and intermediate shaft with chains into the crankcase half. 8. Fasten new collar nuts (3 pieces). Tightening torque 23 Nm (17 ftlb.). 10 10 37 Disassembling and assembling crankcase -GT3 10 -215 Printed in Germany -32, 1999 99610201 10~'<J!,