Engine, crankcase, suspension 911 Carrera (996) · 11. Insert bearing 8 into the dowel pin,

Engine, crankcase, suspension 911 Carrera (996) 11. Insert bearing 8 into the dowel pin, B \ - Diagram shows the alreadymounted 243_99 tension rod bolts in the designated 0 thrust blocks 'J 327_99 ~-.::)---~ 12.1 Preparefour tension rod bolts. Place seal- ing washerson to tension rod bolts. Feed lightly oiled a-rings with conical sleevefrom special tool 9511 over the threaded area and push them on to the tapered section towards the head of the bolts 328_99 12. Prepare tension rod bolts for installation, Note On 4 tension rod bolts of the lower thrust block fastening, thrust blocks 2, 3, 4 and 5, O-rings 10100011 (6 x 2.5) are also inserted (Part No. 999.707.288 40). Note Do not push a-rings on to the bolt collar (~ 10 mm). 10 -216 10 10 37 Disassembling and assembling crankcase -GT3 99610201 Printed in Germany -32, 1999