Removing belt tensioner · No. Procedure Instructions

Removing belt tensioner No. Procedure Instructions 1 Removingair cleanerassembly Undo the hose clamp on the throttle body. Removecon- nector from mass air flow meter. Unclip electrical lead on throttle body. 2 Removingair cleaner assembly. Unclip oil filler neck. Undo hexagon-headbolt M6 x 20 and remove entire air cleaner assembly. 3 Loosening belt pulley Undo three hexagon-headbolts (M8 x 12) by approx. one halfturn. Note The belt pulleycan also be loosened with a restraining strap after removal of the drive belt. 4 Removingdrive belt. Mark belt travel direction with a coloured pen. Slacken belt, turning the tensioning pulley (wrench size 24 mm) clockwise, hold still and simultaneouslytake the belt off the drive pulleys. Undoright-handfasteningscrew(in directionof travel)and5 Looseningthree-phasegenerator unscrew. Undo left-handfastening screw (with deflection roller) by three turns. A gentle tap on the fastening screw loosens the threaded bushing in the generator arm (use aluminium mandrel). 6 Looseningair conditioning Undo front compressor fastening screws (2 ea.) and discon- nect electrical plug connection. compressor 13 -14 13 73 19