fullymatted.
Back to search
996 Carrera Group 1 – Part 1 Engine / PAGE 153

No. Procedure Instructions · Lift generator up and out of the slotted generator bracket.

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 153
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) Engine -Crankshaft, pistons No. Procedure Instructions Lift generator up and out of the slotted generator bracket. Unscrewfastening screw and remove with deflection roller. Note Do not disconnect electrical connections or plug connecti- on. 7 Loosening air conditioning Undo compressor fastening screw between the intake compressor pipes of cylinders 4 and 5. 8 Removing throttle body Disengageaccelerator cable and remove throttle body. Pull off vacuum check valve. 9 Removing supply tank of the Suck fluid out of the upper supplytank until the level is be- power steering system low the joint. Turn bayonetlock ring counter-clockwise. 10 Removing supply tank Detach bracket from supply tank and B+ disconnection point and set aside. Pull supply tank up and off. Suck off fluid level of the lower supplytank and then immediatelyclo- se the openingwith a suitable plug (0'30). 1 Detaching steering return line In order to detach the line from the supply tank, push the red unlocking ring toward (arrows) and simultaneous- ly pull out the line. Use two plastic spatulasto press the un- locking ring. 13 -15

This is a source reference. Confirm exact model applicability in the original material.