Hi all,
I have just purchased some
spyder
wheels from a
cayman
R.
With the additional width and offset, I’m trying to establish if spacers will be needed.
Does anyone with a
cayman
R, or these wheel
use wheel spacers?
I would just try them out first, Then measure to make sure what ever spacer you choose is not going to produce wheel rub. The ride height and camber also play a part here. If your car sits too high due to OEM springs, then you may want to either buy H&
R springs
and B8 shocks to give that wheel the correct look inside the wheel well. If you have too much gap above the wheel, it creates a lifted look. Not good like taking your
Porsche
on a surfari.
Hi, thanks for your input. I do have it lowered at the moment and have a 10mm front spacer and a 15mm rear.
my calculations tell me without spacers the front will be 1mm further in board, and the rears 4mm. I will have to see how they look
Interestingly the note from
Porsche
for their offical spacers says "Note: Not in conjunction with the 19-inch
Carrera
Sport wheel or the 19-inch
Boxster Spyder
wheel."
I wonder if it's something to do with 19" wheels or the offset of those two?
I think it's the offset and rim width. Looks to me like they are okay with you reducing the offset to the low 50s/40s so they allow the 5mm spacer on the more narrow rims only. Assuming that you're not running
really
wide tires I can't see there being any problem. Below is my
unconfirmed
info.
I have 5mm spacers on my
Cayman
R from the factory
Ah, interesting. So I presume that your rims are 19x8.5 and 19x10 with an effective offset after spacer of 50 and 37?
They are 19" wheels but never needed to measure
decided to go with a set of OEM 5mm spacers around 😊
The new wheels, what are the widths/offsets/tire size? Offsets specs without spacers
Looks fantastic! I'll post when mine are fitted
Great site that will do all the math for you.
Just saw it was referenced above
Alloy Wheel & Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
Alloy Wheel & tyre fitment calculator - it calculates inset, poke, speedo error, tyre stretch and loads more.
www.willtheyfit.com