Ding Repair - 986 Forum - The Community for Porsche Boxster & Cayman Owners

I have removed several dings from the hood myself, but have a couple in my passenger door that I havent had much luck with. Gonna let the pros handle those, but was wondering what price range to expect. I dont want them to quadruple the price just because its a Porsche. I've done some searches and found numbers from $75 per panel up to $600-$700!?! Any advice is appreciated!

I had three taken out by a pdr guy. One on the clamshell, two on the driver side door just like yours. He charged me right at $100. I'm in Kansas (hails often) We have lots of those guys around. I wouldn't pay more than that. Door dings are fairly easy. The clamshell one was not. good luck sean

That's great to hear! Thanks! I'll make some calls tomorrow.

Just picked up a 98 Boxster - had a guy go around the entire car. Very small dimples in driver's door, passenger door had a good shopping cart ding 1/2" wide by 1 1/2" long...same on the rear qtr just above the vent. Also, had the frunk and trunk smoothed out. Some pop-up dents, as well as a few depressed dents from previous owner pushing too hard to close the frunk. Took him about 2hrs...$200 and she's showroom new! Guy I found has been doing it for 20+ years...Very pleased...

I actually have several "outies" on the rear lid as well. Like the trunk was closed with something too large in it. All of them are very small, but I think I'll get a quote on all of them. If I could get them all done for under $500, I'd be thrilled! (4 or 5 outies on the trunk, along with the two on passenger door)

I have had a couple removed which averaged about $30 a ding.

Just curious, how are the dings and outies removed? When shopping for cars I noticed that outies on the Frunk & Trunk are quite common, must remember to be careful closing them when loaded. Fortunately my metalic Black car does not seem to have any flaws so far, but everything shows like crazy on black. I see a spider web strand blown across a fender and it looks like a scratch, but when its freshly clean and washed its a stunningly sexy beauty.

I've seen outies removed with a plastic punch looking thing. They knock them down and then bring them back up again. Sometimes back and forth a few times until right. sean

I used the line board in the pic above, some basic hand tools, and lots of elbow grease. It was actually fairly easy after watching some paintless dent repair videos online. The best tool for me was a small hammer and a backward screwdriver. I used the smooth, slightly rounded plastic end of the handle as a punch, tapping the driver end with a hammer. It's a back and forth process. Knock it out, tap it down, etc, until its perfect. That first was nerve racking, but it got easier. The two in the door are just hard to get to.

BTW, I experimented on my poor old Dodge first.

I am way too anal about the appearance of the Boxster. So, when I caused a very small outward ding on the top of the rear trunk lid I knew it had to be fixed. I came across this thread during my search. I had a tech out to my house and he was able to make the surface flat again but the paint was slightly marred. He had me meet him at a body shop and they buffed it out to a high shine. I feel like I dodged a bullet on this. I was afraid it was going to need to go to the body shop.

Hey chuck, what did this cost you? I'm also contemplating taking mine in. Have the slightest dent in the left front quarter panel that drives me nuts.

He tried to charge me $25! No way. I was so pleased I paid him $40. I had to force him to take the additional money. I have used him before. He is a great guy. Reading other post it ranges from $25 to $75 per ding or panel.

Quotes source post: 471200

Thanks for the info. It'll be on the ticket for spring with the tires and suspension refresh.

Interesting topic, I was just watching videos yesterday too on Youtube about PDR. I was contemplating buying a kit and doing it myself. It looks like you really need a lot of practice and patience though, so I may just have it done professionally. I have a bunch of dings and some small dents in the car mostly on the passenger side. The hood has quite a few probably from a hail storm. I really don't want to have the car repainted, that would cost thousands. I bought the car sight unseen aside from photos and the body has no rust but a lot of dings. I'm not sure I would have bought it if I saw it in person, but it runs good and the interiors in nice shape and the price was fair I think. It was a one owner car with a clean Carfax, that's another reason why I bought it. I may just get an estimate, there's a local body shop that does PDR too. I might just wait until spring though.