8 captured repliesDiscussion pagination complete · Source accounts, not a confirmed diagnosis
THIS DISCUSSION / SOURCE-DERIVED OVERVIEW
Discussion summary
YOUR RESEARCH996 Cab Firewall - Guardian Install
Leading reported evidence
Fill with overspray
Performed · outcome unconfirmed
No successful repair reported for this finding.
0
Reported fixes
0
Unsuccessful attempts
1
Discussions
Read evidence and context
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that performed work without a confirmed outcome
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Performed · outcome unconfirmed
These holes can get filled with overspray from the factory, but you can poke through very easily.
Leading evidence: 'Fill with overspray' (no explicit attributable resolution; this is a reported action or suggestion). Across 1 matching discussions, The most frequently discussed action is 'Fill with overspray' (1 discussions). For that action, 0 discussions report a resolution and 0 report an unsuccessful attempt. No action has an explicit, attributable resolution report under the current rules. These are forum reports and suggestions, not a confirmed diagnosis.
Source reports, not a diagnosis or a success probability. Counts refer to discussions and can overlap.
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that performed work without a confirmed outcome
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Performed · outcome unconfirmed
We've installed a ton of these and haven't ever had issues with cabs more than coupes.
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that performed work without a confirmed outcome
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that performed work without a confirmed outcome
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Performed · outcome unconfirmed
There are many ways to run the wires to the engine, some have ran them through the boot that allows the shift cables to pass through the cabin, others run them the way that I explained above and others have drilled and used a grommet.
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that contain suggestions
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion · Original poster
The only real problem I've run into so far is trying to figure out how to get the wiring through to the engine.
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion
There are many ways to run the wires to the engine, some have ran them through the boot that allows the shift cables to pass through the cabin, others run them the way that I explained above and others have drilled and used a grommet.
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion
As long as the wires are not near a heat source, don't pose a road hazard, or don't contact mechanical workings there really is no problem with running the wires however you see fit.
Discussions that performed work without a confirmed outcome
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Performed · outcome unconfirmed
There are many ways to run the wires to the engine, some have ran them through the boot that allows the shift cables to pass through the cabin, others run them the way that I explained above and others have drilled and used a grommet.
Counts describe captured discussions, not unique people or a diagnosis. Author identities are not reliably stored. Exact duplicate evidence is counted once across matching discussions; one discussion counts at most once per action/state. Multiple repairs reported together remain a combination. Suggestions and failed attempts do not establish a fix. Matches cover whole discussions and can include related faults, model variants and incomplete threads.
8 eligible posts · 0 unverified posts · 1 discussions match the subject in their title or opening post.
Rennlist: 1 discussions
0 evidence records excluded for query context · 0 excluded by outcome qualification · 0 adjusted by outcome qualification.
2 acknowledgements have no verified action link; they do not establish a repair result.
Outcome without a verified action link
The fact that the car is a cab makes no difference.
I've been traveling a lot lately but took off a little early today to try to finish up the IMS Guardian install I started earlier. The only real problem I've run into so far is trying to figure out how to get the wiring through to the engine. I've spent enough time searching that I'm starting to feel stupid. I've pulled apart quite a bit of the interior in the rear, too, and I can't find anywhere that will provide straight forward access to the engine bay.
I'm not comfortable with pulling out a drill. Does anyone have a Diagram for Dummies on how to get the wiring to the engine in a Cab?
Any help would be greatly appreciated!
Thanks,
-Eric
You need to take of the rear passenger panel. Once the panel is off its a lot of padding to be pulled out and there will be a rubber grommet with wiring that goes to the engine compartment. Use a screwdriver to get a hole in it and some steel wire (wire hanger) to run your wire with it. There is a hidden screw under the panel that you will need to get to in order to remove the panel. Use a flash light to find it. If I recall its on the top corner closest to the seatbelt area. I ran a reverse camera to the head unit that way.
Are you talking about a cab or a coupe? My car is a cab. I pulled the back panel and the rear side panel on the driver's side and there wasn't really a lot of padding anywhere. The whole system is hooked up but for the fact that I can't get through the firewall. I located one grommet under the carpeted area where the soft top sits when it's down but then the wiring isn't long enough to reach anywhere near the plug.
-Eric
It's been a while since I poked around back there, but as I recall there are two holes behind where the rear passengers legs would be. One on each side. These holes can get filled with overspray from the factory, but you can poke through very easily.
The fact that the car is a cab makes no difference. I always locate a factory pass through point, pop off the rubber plugs, cut them to make a grommet and run the wires through them. We've installed a ton of these and haven't ever had issues with cabs more than coupes.
There are many ways to run the wires to the engine, some have ran them through the boot that allows the shift cables to pass through the cabin, others run them the way that I explained above and others have drilled and used a grommet. As long as the wires are not near a heat source, don't pose a road hazard, or don't contact mechanical workings there really is no problem with running the wires however you see fit.
I went through where the shift cables go through. After removing most of the interior I couldn't find a good place without going through with starting to remove the convertible top parts.
Thanks for the replies everyone.
The good news is that I actually found a solution on Saturday -- there's a grommet on the rear passenger side floor that provides access through another grommet in the wheel well.
The bad news (for me, at least) is that within 30 seconds of feeding the wiring through the grommets, I was hit with symptoms of the flu (or some nasty bug). At least, I now know why I've been keeping an empty bucket in my garage. Project cut short again.
I will say this about the kit: It's actually a very straight forward install. The install really shouldn't take more than a few hours for even a novice -- assuming they know the location(s) of grommets to pass through the firewall. It should be much quicker for someone with experience. The actual electrical connections couldn't be easier.
My only real criticism is with respect to the pass through -- at least on the cab. I know Jake said that there's no difference between a coupe and a cab and I won't argue since I have no clue. All I can tell you is that to someone who has never seen the underside of their 996 before trying to tackle this project, it's a learning experience. I found plenty of grommets. Where their counterparts existed within the car still remains a mystery. I have no doubt there may be some behind all of the rollover protection behind the back seat but I wasn't going near that. Brian's suggestion was the only other place I was prepared to start pulling apart since I had to imagine there was a way through the shift linkage cables. Some of it may be second nature to folks who work on these cars but to the novice some of these things just didn't jump out at me.
Anyway, once I'm feeling better and able to get out of bed (maybe by the weekend?) I'll button everything up underneath the car, connect the wires to the plug and make sure it actually works.
I guess one other bit of good news is that when I pulled off the shifter cover before holding off on that approach I discovered a B&M short shifter on my car. I've always loved the way the car has shifted and I could never imagine why anyone would change out their shifter. I guess I now know why!
-Eric
This is a source reference. Confirm exact model applicability in the original material.
