Intro and recomendations before DE

I made my brief introduction to the 996 forum when I purchased by C4S from Colorado a few weeks ago and drove it back to Charlotte. I thank those who helped me along the way. It was quite an adventure and a great way to learn about the cars capabilities. For those who didn't follow the thread, here is my car as I know we all like pictures: Front My best side Love the seats With that out of the way, I have been doing DE's for the past 15 years. I know how to set up a rear drive 911 but as this is AWD I am going to try and resist doing too much to this one initially (I am already wondering how it would handle with KW Clubsports) but my first question is specific to the 996 engine. This car already has the IMS/RMS/Low TEMP Thermostat. Should I consider a Deep Sump Kit that LN Engineering sells prior to taking her on the track? Other suggestions as preventative engine maintenance is welcome. My second question is to setup. I figure I will start with street tires (Michelin Pilot Sports) and the current suspension is the Euro M030 setup with H/R bars. Brake pads are stock as is the fluid and I do plan on replacing the fluid to high temp and different pads. The track will be VIR so it is high speed but does have a few significant braking zones. How do you guys set up your bars assuming they are adjustable? I am daily driving the car and it is a complete joy every time I start her up. All of a sudden, I am very willing to take the long way home.

Look at other tires like RE-71, RE-11, Dunlop Star Spec, Hankook RS 3. They are all better street tires for tracking.

Oiling under high G's is not optimum with these engines. A deep sump kit with improved baffling to 1) hold more oil; and 2) hold the oil better around the pick up; has to be pretty high up the list of track mod's. IIRC the LN Engineering deep sump kit comes in for high praise so the kit might be the way to go. You should show up at the track with fresh oil too.

Quotes source post: 13608089

You'll likely be fine on your street tires, however for a bit more peace of mind I do recommend following Macster's advice and installing a deep sump kit/baffle. The FVD Kit works well and is a very high quality item. If you PM Rhonda@FVD you may get a Rennlist discount.

+1 on the baffle. I went with FVD but LNE is really good as well. I was worried a 2L deep sump would put the oil pan too low so I went with the .75L sump. Make sure you have an oil in that can handle the heat has well. For the C4S, in think Vandersmith ran 3rd hole front and rear (middle for front, 3rd stiffest in rear.) The clubsports would be awesome if you are going to track it quite a bit. They have much better spring rates than the V3s. They will also be alot harsher for daily driving. Eventually you will want to drop the front diff and go rear wheel drive if you want better feedback and quicker times. AWD and PSM are really good if you are worried about walls or want a little more leeway to make mistakes though.

Quotes source post: 13608069

Thanks for these, I will see if they come in WB sizing. My initial thought was to see how well the Michelins worked and then go to a more aggressive tire, should I not like them on track.

I looked at the FVD Deep Sump and it also looks like a great product. I will send Brenda an email, thanks for the suggestion. Appreciate the sway settings. I will start with these settings and see how they work out.

Quotes source post: 13608981

Don't know about Pilot Sports, but Pilot Super Sports sometimes tend to chunk when abused on track.

I guess you're driving flat out

Quotes source post: 13609577

He needs to be put in the fastest run group first! OP, welcome to the mad house. Nice looking car.

Quotes source post: 13608089

Just keep it under 0.8 G and it will be fine. Someone quoted that number from some Porsche literature on another thread. I think from an interview with Harm Lagaay, Pinky Lai or..?

Quotes source post: 13609681

But this car with decent tires will approach 1.5 G. A good deep sump will cover that.

all seriously good advice thus far. Some things to consider, how many miles? Might want to replace the water pump. Also, if your car smokes at start-up, give some consideration to replacing the AOS with the Motorsport version. Pricey(er) but well worth it. I suspect that the extra weight of the AWD will add to brake pad usage as you try to haul that baby down before turning in......consider brake fluid change (as previously mentioned) also, might want a higher performance brake pad. some like Pagid, some like Ferrodo(?), some like PFC (I tired them, no bedding in, but the dust welded to my rims and ruined the finish), there are others, too (Hawk, Endless?). I hate to mention this, as the topic has been covered ad nauseum, has the IMS been addressed??? GL, enjoy the new baby, if you are running at VIR with N Carolina, say hello to Alex Bell for me please....... have a blast!

Quotes source post: 13609618

Thanks, it does seem like a very ACTIVE community here on the 996 forum, and I appreciate that.

Quotes source post: 13609618

And.... Queue video.... Trackday Comedy - FLAT OUT - YouTube

Thanks everyone for your advice and comments. Country911, you have some good points to consider and to answer some of your queries: - IMS/RMS/Water Pump replaced 3,000 mi ago - 68,000 miles on car - no smoke at startup -160 deg thermostat Not certain about the AOS but have records and will check. So there is a Motorsports version, sounds intriguing? I do plan on a higher temp fluid and was thinking of using yellow stuff pads. With the turbo brakes as standard, I anticipate braking won't be an issue. Yes, it will be with Carolinas at VIR - come join the fun as many drive down from the NE for one last run before winter.

Carolinas will also be at CMP this weekend. Not too late to sign up!

Hmmm...that voice sure sounds like Vic Elford. But he's a real gentleman, not a jerk. relinuca