18 captured repliesDiscussion pagination complete · Source accounts, not a confirmed diagnosis
THIS DISCUSSION / SOURCE-DERIVED OVERVIEW
Discussion summary
YOUR RESEARCHRecommendations to get a cup decklid
Leading reported evidence
Use po may have messed
Performed · outcome unconfirmed
No successful repair reported for this finding.
0
Reported fixes
0
Unsuccessful attempts
1
Discussions
Read evidence and context
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that performed work without a confirmed outcome
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Performed · outcome unconfirmed
Since they were used the po may have messed with their shape and getty couldnt get them to fit right so i had them leave the mounts in their standard place and ship it.
Leading evidence: 'Use po may have messed' (no explicit attributable resolution; this is a reported action or suggestion). Across 1 matching discussions, the most frequently mentioned possible cause is 'good call' (1 discussions; 0 report identifying it and 1 suggest it). The most frequently discussed action is 'Adjust decklid' (1 discussions). For that action, 0 discussions report a resolution and 0 report an unsuccessful attempt. No action has an explicit, attributable resolution report under the current rules. These are forum reports and suggestions, not a confirmed diagnosis.
Source reports, not a diagnosis or a success probability. Counts refer to discussions and can overlap.
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that contain suggestions
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion · Original poster
Fitment overall was decent, still need to adjust the decklid to sit evenly on the bumper.
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that contain suggestions
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion · Original poster
I will be drilling into the wing stands to adjust for the placement.
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that suspect a cause
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suspected cause · Original poster
Probably a good call to send in the uprights so you don't have to modify your uprights later like I did to fit the decklid.
Use different stands not supplied you will likely need
Suggestion or failed attempt
No successful repair reported for this finding.
0
Reported fixes
0
Unsuccessful attempts
1
Discussions
Read evidence and context
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that contain suggestions
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion · Original poster
However, if you want to use a different stands not supplied you will likely need to fabricate to get them to work.
Discussions that performed work without a confirmed outcome
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Performed · outcome unconfirmed
Since they were used the po may have messed with their shape and getty couldnt get them to fit right so i had them leave the mounts in their standard place and ship it.
Counts describe captured discussions, not unique people or a diagnosis. Author identities are not reliably stored. Exact duplicate evidence is counted once across matching discussions; one discussion counts at most once per action/state. Multiple repairs reported together remain a combination. Suggestions and failed attempts do not establish a fix. Matches cover whole discussions and can include related faults, model variants and incomplete threads.
18 eligible posts · 0 unverified posts · 1 discussions match the subject in their title or opening post.
Rennlist: 1 discussions
0 evidence records excluded for query context · 0 excluded by outcome qualification · 0 adjusted by outcome qualification.
0 acknowledgements have no verified action link; they do not establish a repair result.
Generation: 20261026T122219Z · outcome-qualification-6. Deterministic extraction; no AI model inference. How we use sources
Hey all,
Looking for recommendations on where to buy a cup decklid for my 03 carrera. Ideally one for a street car with fittings for fan, etc as its a dual purpose street track car. Haven't had any luck contacting mashaw or getty and gt-racing seems only website but a bit pricier than the rest. Setup would be decklid + demonspeed uprights + 55in cup wing. If anyone is selling a used one I be open to that too!
Buy a crashed cup car with a good wing / decklid and part the rest out
An actual cup deck lid is not going to have any provisions for a fan, it has giant vents feeding air direct to the engine. You can see them in the picture below. No room for fan.
Wanted to follow up here for future reference for people looking to get parts:
I ended up getting the decklid/wing from GT-Racing as they were the most responsive to my inquiries. Part came in a bit delayed, supply chain in a mess everywhere, but overall was responsive to know when it was getting shipped. Received decklid and overall looked in good shape, I still need to sand down the fiberglass before installation. Fitment was really good for the decklid and didn't require any adjustments. Parts were shipped from Socal. I will update again once I finish installation.
Only issue is that the holes drilled into the fiberglass for the wingstands are misaligned. While the supplied GT3 wing stands align properly and work, when I lined up higher stands from Demonspeed, the passenger side wingstand only aligned with 2 of the 3 mounting points. Both higher stands are drilled symmetrically and while examining the GT3 stands you can see the holes are not symmetrical but instead match the placement on the decklid, indicating they were drilled to match. The wing mounted on the higher stands is level, to confirm that it is a misalignment of that one mounting pt.I reached back out to GT Racing about this but have not heard back.
If you are looking to get the decklid and use the supplied stands and wing, it will work for you application. However, if you want to use a different stands not supplied you will likely need to fabricate to get them to work. I will be drilling into the wing stands to adjust for the placement.
Thanks for taking the time to come back and provide feedback. It seems a lot of the information provided on the forum is out of date and it's good to know that GT-Racing is the most reliable supplier in 2022!
Edited my post to reflect information below!
I may have to go with GT too as both MaShaw and Getty r mia in any responce to emails and phone calls. Unfotunatly GT is about $500 more than MaShaw for what looks like the same part.
Getty finally returned my e-mail today. Maybe they saw this thread? Anyways keep bugging them. Mashaw is still mia?
Edit: They got back to me again and it ooks like there leed time is about a week and shipping is resonable from CA. I dont really like spending $350 more then the Mashaw unit but since they have had zero customer service to this point im gonna order from Getty. They have also requested that i send them my uprights so they can make sure they put the mounts in the correct locations. I guess thats why they r a few bucks more?
Probably a good call to send in the uprights so you don't have to modify your uprights later like I did to fit the decklid. Although I would expect a standard positioning for uprights
Finally had some time to install the parts. Added some pictures of the final install as well as the modification I made to the upright to fit the decklid. Fitment overall was decent, still need to adjust the decklid to sit evenly on the bumper. I transfered the fan over and ended up modifying the harness to eliminate the spoiler error and keep 3rd brakelight working. Heading to Thunderhill this weekend so excited to see how it drives with new aero and tires.
Looking good. Turns out that sending the uprights was a waste. Since they were used the po may have messed with their shape and getty couldnt get them to fit right so i had them leave the mounts in their standard place and ship it. Im sure i can mod them to work. I gave them my cc# so hopefully it ships soon.
