99' Boxster Wheel Ideas - Page 3 - 986 Forum - The Community for Porsche Boxster & Cayman Owners

Hello, I recently bought another 986 Boxster with a pretty sweet color in my opinion. I've been wanting to find some new wheels for this car but it seems like online the options are fairly small with what people decided to choose. I was hoping anyone and everyone could share the wheels they have themselves and or any ideas/links to some nice places to see some choices on both low, medium, and higher end pricings. Ive attached 2 pics, assuming they upload, of my car in case anyone had any ideas for certain wheels for this color / layout

Watch what diameters you choose; the early (pre 2000) car tubs were not reinforced around the suspension mounts as the 2001+ cars were, and they could actually rip the mounts loose or crack the bulkheads due to the leverage of wheels over 17" in diameter.

Quotes source post: 662412

Interesting - I'd never heard of this concern before. In my case (2000 S) this generates a pair of questions: 1). Is this an S vs. Base issue, in that the higher powered S tubs were perhaps made to be stronger right from the start? 2). Didn't the 2000 S versions come with 18" wheels as an option? Or did the 18" wheel option start for the 2001 model year? Thanks - DM

Quotes source post: 662412

I did also have a thought regarding this. I've had 2 986 Boxsters, this one associated to the thread does have 17'' wheels however my previous 1999 Boxster did have 18'' (265 35 ZR 18) and to my knowledge never had issues with. I am open to hearing why sticking to 17 would be safest as i want to make sure this car lasts me forever although, my only counter is that the largest market for these Boxsters appears to be 18 more times than not over 17. If you also happen to have any recommended wheels, id be more than open to seeing what you would recommend.

Quotes source post: 662415

1. Tubs are exactly the same. 2. 18" became a regular factory option in 2001 and very late production 2000 cars after the factory tub modification. And no, we are unaware of telling when the modifications become standard as it was done during the production year, so unless you know for a fact that car was delivered with 18", putting them on a 2000 runs a risk.

Quotes source post: 662416

Believe as you choose, but we have had to fail damaged tubs picked up during PPI's and state inspection reviews, and in the state my shop is in, a damaged tub means the car is technically "totaled" and cannot be returned to the road. Porsche even had a TSB: TSB #4407, dated March 4, 1999: " Eighteen inch wheels are not approved for use on Boxsters. Use of eighteen inch wheels on Boxsters under severe conditions may result in structural failures of the body and/or suspension".

Hi Hamstuh! Welcome to the forums! I did some searching and found a wheel picture thread that might be of use. The Turbo Twists are always a personal favorite of mine http://986forum.com/forums/boxster-general-discussions/66253-picture-wheels-you-have.html

Quotes source post: 662421

I appreciate the detailed information! I really do want to make sure this car lasts as long as possible so i will stick with 17s and keep my search limited to that size. I might be relatively young for a 986 owner at 21 so im still new to ALL information regarding this car, but im doing my best to learn as much as i can so i appreciate any assistance!

You will have cheaper tire options with 17s as well as a better ride. My 911 has 19s and I hate them. There is no sidewall to absorb impacts from our perpetually terrible Illinois "roads."

The 17 inch Sport Classic option is one of my favorite looks. Worth the extra cleaning time. /

Quotes source post: 662427

Overly fancy wheels put me off, but I do like these. A friend of mine has these on his Boxster and I appreciate them every time I see his car.

Plus, they are strong and reasonably light. (approx 20 lbs front, 21 lbs rear)

Quotes source post: 662421

I figured id reply to you as you seem to be well informed. I found someone local selling these 17 inch 911 wheels that match the tire spec and lug pattern i have on my 99 boxster. Do you believe i should go with these or should i look elsewhere

On the last pages there is a good overview about the genuine Porsche wheels, Dimensions and other hints. I bought a set of Boxster S II wheels (17") in anthrazit yesterday, think they fit the car very well.

A good reference: https://www.944racing.de/wheelweights.php 16" "Boxster" with extra tall tires. 16" "Boxster" on normal tires. 17" "Sport Classic" Are my favorite too. Just say "No" to 20" wheels.

Quotes source post: 662420

JFP - Not questioning, but now puzzled. In trying to find a copy of the noted TSB for reference, my search brought forth an old 2015 thread here on this same subject: https://986forum.com/forums/boxster-general-discussions/55502-1997-boxster-18-inch-rim-fitment-question.html This old thread indicates that the reinforced tub came about in the year 1998 in lieu of the year 2000. I also note that the owner's manual for my 2000 S clearly discusses both 17- and 18-inch wheels, so seemingly this would have been an option ordering box that could have been ticked back in that day. That all being said, have you ever snapped a picture of a damaged tub? And is this entire issue more applicable for a raced / tracked car vs. one which is strictly street driven? Thanks - DM

I've been looking at the Cup II (993) wheels for mine, they're only a little wider and look great. If I had a little more money, I'd be looking at the Cup I (964) wheels, they're the same style as the ones on the Boxster concept car. Cup II: Cup II again: Cup I: This is the only picture of Cup I's I can find, I suspect it's because of their price/availability.

Quotes source post: 662436

The document I posted is clear: The tenth digit of the 17-digit vehicle identification number indicates the model year, z. For example, WP0ZZZ98Z V S600001: V = 1997 W = 1998 X = 1999 Y = 2000 1 = 2001 2 = 2002 etc. And further above the table with the 18” wheels: 18" only for vehicles from model year 1998 (W) onwards. So if you find a "V" in your VIN as tenth digit you are not allowed to run 18". And keep in mind that you need to stick to the mentioned dimensions and hints of the tires for 18" rims to be on the save side even if you have a MY 1998 onward!

I knew i had it somewhere on my car, I did actually find this chart on my current 99 boxster. Correct me if im wrong but would i be able to get 18s assuming they match that spec provided?

Quotes source post: 662436

The copy of the TSB in our files is dated 1999 but maybe an updated version which is not uncommon in their TSB system, and we always discarded the outdated versions when the new ones came out. To my knowledge, Porsche first acknowledged there was a problem sometime in 1998, which started the process to access it and determine an engineered fix for it. As it turned out, the best fix was to thicken the metal used in the tub bulkheads and suspension mounts to prevent the visible cracking that was the first signs of the problem. In order to do this, Porsche had to make several changes in their internal parts system, which took some time, and quite plainly they were not going to just throw out the thinner tubs after making the TSB known. The transition to the new tub started sometime in model years 1999-2000, and much like the single row/dual row IMS changeover, there was never a clear "de-embarkation" point such as a chassis number or production date, so some of the 2000 tubs were thicker metal, others were not. When we became aware of the issue from the factory TSB, we began to take special steps when looking at pre 2001 cars. Because our state inspection permit requires us to examine critical suspension attachment points for rust out or other similar failures, and to report them to the state when we found them, we started using a crack detection penetrating fluid that was applied to the suspension mount areas of the early cars that would leave a stain if there was cracking, and we saw it on a couple of cars. During one PPI of an early Boxster, we found the entire rear bulkhead and suspension mount areas to be sprayed with an undercoating material that is not factory, and which the car owner would not allow us to scrape off to test. Suspecting something was amiss, we borrowed and ultra sonic testing device from a neighboring chassis fabrication shop and tested the metal around two of the rear suspension mounting points, both of which indicated the presence of cracking, so we told the prospective buy to walk away from the sale. We heard later that another shop passed the car for PPI for another potential buyer, but when the buyer took it to a dealer for state inspection, they also found the damage and failed the car, which resulted in an ugly lawsuit to get the original sell to buy back the car as the state pulled its registration for being unroadworthy. As for photos of the type of damage you might find, yes we have copies of them in our computer files, but cannot release them to the public without the prior written approval of the persons that paid for the examination due to our state laws which say such materials are their property, not ours. This the exact reason why in many states, Porsche dealers will not release the service records for a vehicle.

This whole wheel thing seems, at least to me, as the automotive equivilent of a foot fetish. I'm happy with my 2000S just as it was born with 17" turbo twists but to each his own. Larry (the Bald Eagle)

Based off the chart i provided not long ago with an 18 inch rim option. Would i be able to fit a 245 50 ZR18 on my 99 Boxster ? Im not sure of the limits themselves to what size i can actually use. I dont use this car on tracks or racing etc so im not too concerned with a slight decrease in some turning performance

Quotes source post: 662440

Thank you for taking the time for your interesting (and insightful!) reply! - DM

Quotes source post: 662443

I have no idea as the presence of a sticker of unknown date or origin does not confirm or deny if the tub is the later, reinforced design. And, as others have noted, 18- and 19-inch diameter tires are distinctly harder riding than 17 inches for everyday use. Your car, your money, your choice; but I get the impression this is a "bling" decision, not a performance related one....

Quotes source post: 662447

Ideally id like to get them for both performance AND looks. Which is why im completely open to any and all information. Ive kept my search limited to 17 inch rims, i just like to be THOROUGHLY informed on any matter so I know which routes are safe and not. I did also post some wheels even lower, locally, someone is selling that are 17 inch rims. Do you happen to know if those would be safe to buy ?

Quotes source post: 662448

There is no way for me to say without physically looking at the condition of the wheels in question. Used wheels are often a crap shoot because there is no way to remotely check them for concentricity, cracking, "road rash", etc.

I had somehow acquired this in my list of model year differences "18” wheel option with rear chassis reinforced to accept new wheels. Rear body structural change included redesigned wheel wells and coil spring mounts, lower engine compartment bulkhead, rear wall crossmember and rear axle mount reinforcements." as a 1998 change. Has anyone anything definitive that contradicts that date? I always assumed people were putting on bigger wheels and going racing and the defects showed so Porsche did an improvement but I don't know where I came up with the date as that was written years ago.

"In 1998, Porsche added some reinforcement in the rear monocoque structure, which was supposedly required to allow running 18" wheels. Other than that there is absolutely no difference that I can tell in any 986 or 987 Boxster or Cayman suspension." This was something i found randomly doin some digging, wonder if thats the case maybe it would be fine ? Im only stubborn with this topic bc it seems the market for porsche wheels are GREATLY higher in 18'' rims and im not a track driver so idc for small differences in performance from a 17 to an 18.

Quotes source post: 662427

love this setup. sport classic is THE best look these cars have had. tough to find though. I'm eventually going this route myself.

Bumping this for a second opinion. Wound up getting a pair of some decent 17'' 10 spoke 911 wheels for pretty cheap with some Yokohamas on em, took em to a wheel shop to make sure they were absolutely good for use and they confirmed. Was hoping for a second opinion on whether I should sell or keep em. I could go with either or to be honest. If someone local to me wanted them as well I would sell, they are a bit dirty but i plan on cleaning em with some degreaser and elbow grease

Opinion? I never cared much for the 10 spokes. They are a bit too spokey for my taste. 5-spoke Carrera II, like on the 04 Special Edition look 'correct' for a straight spoke wheel. As far as size and ride, I think they're a good choice depending on the offset. Some 996 wheel fit best with a spacer in front. Not sure of those.

After all the years, i still like my 18" Carrera II rims.

Decided to put them on yesterday just to see if id like em. Not quite as bad as i thought, I feel like the sidemarkers throw off the colors a bit. Maybe if the wheels were powder coated a dark grey / gun metal grey, or maybe black ? Took em to work today and they look pretty good from afar. If anyone else has opinions feel free to share. Im always open to second thoughts even if negative side note: the first picture driver side door window just has a sun shade on I made as the sun beats pretty hard.

update on those wheels: I see what people mean when they say the drive quality can decrease, i feel a slight vibration on longer / larger turns at higher speeds though its definitely nothing to complain about. I like em but I might just swap the stocks back on next week if I feel it gets annoying

figured id update this old thread bc why not. after nearly 2 years of no updates i finally managed to get my personal dream wheels for my boxster. these were some i had wanted to get before i picked up the 10 spoked i posted in this same thread but were too far to pickup. to my luck and surprise i ended up moving to the very state these wheels were After looking at the overall specs, i do believe i may need some spacers for the front but the rears will not need em, no big deal just glad i was able to pick these up for a huge deal

Cayman wheels? I’ve drooled over those for years.

Quotes source post: 670237

yes sir! Found these 5 spokes for $400 with the tires

something fun to try - get some tape and black wheel paint and refinish them fuchs rsr-style ... (edit to add that i'd even contribute some black centre caps to the cause)

These are some of the wheels I've had on past cars and my current orient red 2.7. They're all 18" which I think is the sweet spot for Boxsters.

Spacer 20mm front, 10mm rear

I went the route Radium King suggested. I think that post is actually what sent me on the journey:

^^^^ Awsome!

Quotes source post: 670652

Thanks! And yes, the side decal is way too high. I trusted AI when I shouldn't have. At some point I'll get a new set and do them properly, but it's fine for now.

... and black makes it easier to get all the brake dust off after a track day ...

True, I have separate track wheels and tires. Of course they are silver. Well, mostly silver, under the brake dust.

Here's my Arena Red '98 with Cup 1 replicas by Mille Miglia, they're soft and heavy, but they were cheap and look great!