Hello All.
I'm working on my cdr30 radio, and in need of the pinout for the blue 12-pin quadlock which .
I've already figured out the pinout on the green plug.
Can anyone post the wiring diagram for this particular plug?
Thank you in advance.
Somebody by the name of Mike emailed me this about 9 yrs ago (for CDR30). I doubt BT changes anything but I'm not sure. See if it makes any sense.
Chamber 1 (speaker outputs):
1 HR + (purple)
2 VR + (gray)
3 VL + (white)
4 HL + (green)
5 HR - (purple / black)
6 VR - (gray / black)
7 VL - (white / black)
8 HL - (green / black)
Chamber 2 (Electrical):
9 CAN low (blue / black)
10 Telephone mute (?) - Not required
11 CAN high (yellow / blue)
12 Ground (brown)
13 wake up (green) - not required
14 Antenna 12V (white) - to the antenna amplifier in the right A pillar
15 permanent + 12V (red / brown)
16 wake up (?) - Not required
Chamber 3 (audio inputs - green):
1 --
2 Aux L (pink)
3 --
4 aux screen (black)
5 --
6 --
7 Aux R (green)
8 Aux mass (orange)
9 --
10 --
11 --
12 --
Chamber 4 (ext. Amplifier - blue):
4 Car Amp 12V (red / white)
BTW, I worked with Loi from EuroMotorSpeed when he 1st supported the CDR30 and IIRC he only needed to move one wire from his old CDR24 harness. Sorry I don't recall which one. But here's a diagram for it.
BTW, it is really a bad idea to create multiple threads with the same subject and/or content. It pisses off mods and just ends-up being merged. Anyone you want to reach will see the 1st one. Remember that answers to questions like this serve as a technical resource for the
next
guy, and having responses scattered all over the place makes it a mess.
OTOH, this board is so slow responding, maybe you just hit "Save" twice and the post got duplicated.
Thank you so much for the info. For some reason my web browser displayed an error i posted first, then i posted again only to see the duplicate. I tried deleting but could not ---- sorry !!!
I have figured out the mail quadlock but my green plug has additional wires and so does the blue plug as seen in this post.
https://www.planet-9.com/attachment...87t-swapping-cdr-31-head-unit-pcm-3-1-head-unit-981-cayman-boxster-img_4467-jpg
I would be thankful if anyone a full wiring diagram for both 12-pin slots.
Thanks again.
Posting here, even though it’s only a similar question.
Does anyone have the wiring or pin out diagram for the CDR30 with bluetooth that shows which wires lead in from the factory microphones in the steering column?
I’m finally replacing the CDR30 (with bluetooth) in my ‘12
Cayman
R with an aftermarket unit that supports
Carplay
, a backup camera, and even Nav if I choose to add it later. It has its own mic, but would prefer to retain the factory mics/placement even if I need to splice some wires.
If no one has it, I’ll eventually figure it out by a process of elimination, but any head start is appreciated!
Edit:
As far as I can tell, the built-in microphones in the steering column only work with the factory head unit. Looks like I’ll be forced to use the mic that came with the aftermarket head unit.
If anyone has better or different info please chime in!
