11 captured repliesDiscussion pagination complete · Source accounts, not a confirmed diagnosis
THIS DISCUSSION / SOURCE-DERIVED OVERVIEW
Discussion summary
YOUR RESEARCHEXHAUST MANIFOLD
Leading reported evidence
Use mini conductor
Performed · outcome unconfirmed
No successful repair reported for this finding.
0
Reported fixes
0
Unsuccessful attempts
1
Discussions
Read evidence and context
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that performed work without a confirmed outcome
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Performed · outcome unconfirmed
Studs etc mine were terrible but I used a mini conductor on them to heat them red hot but with no flame.
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion · Original poster
HI , AM PLANNING TO REPLACE MY MANIFOLDS ON 911 CARRERA CAN ANYBODY WHO HAS ALREADY DONE THIS GIVE ME ANY POINTERS TO WHERE TO BUY, ALSO STUDS AND NUTS, I KNOW ORIGINAL BOLTS,ANY HELP APPRECIATED, HAVE SEEN THEM ON EBAY FROM GERMANY, ANYBODY HAVE EXPERIENCE FROM THESE SUPPLIERS, REGARDS ELWYN
Leading evidence: 'Use mini conductor' (no explicit attributable resolution; this is a reported action or suggestion). Across 1 matching discussions, The most frequently discussed action is 'Replace manifolds' (1 discussions). For that action, 0 discussions report a resolution and 0 report an unsuccessful attempt. No action has an explicit, attributable resolution report under the current rules. These are forum reports and suggestions, not a confirmed diagnosis.
Source reports, not a diagnosis or a success probability. Counts refer to discussions and can overlap.
Use these ,really good quality and everything lined up bob
Performed · outcome unconfirmed
No successful repair reported for this finding.
0
Reported fixes
0
Unsuccessful attempts
1
Discussions
Read evidence and context
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that performed work without a confirmed outcome
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Performed · outcome unconfirmed
i used these ,really good quality and everything lined up bob on with a full system from Topgear,Andy
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that contain suggestions
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion · Original poster
HI , AM PLANNING TO REPLACE MY MANIFOLDS ON 911 CARRERA CAN ANYBODY WHO HAS ALREADY DONE THIS GIVE ME ANY POINTERS TO WHERE TO BUY, ALSO STUDS AND NUTS, I KNOW ORIGINAL BOLTS,ANY HELP APPRECIATED, HAVE SEEN THEM ON EBAY FROM GERMANY, ANYBODY HAVE EXPERIENCE FROM THESE SUPPLIERS, REGARDS ELWYN
Explicit resolution reports before identified causes, performed actions and suggestions. Within each level, matching component labels precede direct query mentions and inherited thread context; successful versus unsuccessful discussion counts, owner confirmations and independent discussion support determine order. This is not a probability of success.
Discussions that contain suggestions
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion
I changed mine for a multiple branch type of eBay great quality just use porsche gaskets.
These are separate views of the same evidence. Frequency alone does not establish a fix, and these counts must not be added together.
Replace manifolds
No successful repair reported for this finding.
0
Reported fixes
0
Unsuccessful attempts
1
Discussions
Read evidence and context
Discussions that contain suggestions
1
0 original-poster resolution reports. Counts can overlap; they are not unique people or a success rate.
0 discussions have direct query context; 0 report a fix in that context. Other evidence may inherit the discussion’s subject.
Suggestion · Original poster
HI , AM PLANNING TO REPLACE MY MANIFOLDS ON 911 CARRERA CAN ANYBODY WHO HAS ALREADY DONE THIS GIVE ME ANY POINTERS TO WHERE TO BUY, ALSO STUDS AND NUTS, I KNOW ORIGINAL BOLTS,ANY HELP APPRECIATED, HAVE SEEN THEM ON EBAY FROM GERMANY, ANYBODY HAVE EXPERIENCE FROM THESE SUPPLIERS, REGARDS ELWYN
Counts describe captured discussions, not unique people or a diagnosis. Author identities are not reliably stored. Exact duplicate evidence is counted once across matching discussions; one discussion counts at most once per action/state. Multiple repairs reported together remain a combination. Suggestions and failed attempts do not establish a fix. Matches cover whole discussions and can include related faults, model variants and incomplete threads.
11 eligible posts · 0 unverified posts · 1 discussions match the subject in their title or opening post.
Porsche Club GB: 1 discussions
0 evidence records excluded for query context · 0 excluded by outcome qualification · 0 adjusted by outcome qualification.
0 acknowledgements have no verified action link; they do not establish a repair result.
Generation: 20261027T022239Z · outcome-qualification-6. Deterministic extraction; no AI model inference. How we use sources
HI , AM PLANNING TO REPLACE MY MANIFOLDS ON 911 CARRERA CAN ANYBODY WHO HAS ALREADY DONE THIS GIVE ME ANY POINTERS TO WHERE TO BUY, ALSO STUDS AND NUTS, I KNOW ORIGINAL BOLTS,ANY HELP APPRECIATED, HAVE SEEN THEM ON EBAY FROM GERMANY, ANYBODY HAVE EXPERIENCE FROM THESE SUPPLIERS, REGARDS ELWYN
Elwyn, hi not sure if you frequent the 911uk forum but a guy on the site manufactures sets in stainless. He often puts a post up when he is going to machine another batch. Might be worth looking if your not in a rush
Regards
I would avoid the stainless steel. Whilst they sound like a great solution, they are a complete nightmare to remove, if they strip threads or need removing.
Go for original bolts from Porsche and monitor condition every few years with view to replace. Ensure new gaskets and properly torqued.
Another option is titanium at a price
http://www.porschetistuds.co.uk/
The hardest part is removing old bolts - mine had to drilled out and threads realigned. Not replaced my manifold yet, but read some aftermarket reduce clearance too, so check.
Good point Tony, I believe the same guy produces titanium fixings if you want. Not sure if on here or 911uk but someone was offering hire of jig to assist in drilling out broken studs
guys thanks for input, shall take a closer look at manifolds, there is little room to start with so shall watch out for reduced clearance. also will go with porsche bolts and gaskets and monitor every oil change, again if anybody spots manifolds or has any experience with german company please let me know, i have got my hands on a stomski jig so hope it will ease the pain, regards Elwyn
FVD in Germany - believe some of their exhaust systems also have official Porsche part numbers. I did find a company in the US that produced tubular systems for 996 and guaranteed clearance was not compromised - but unfortunately cannot find the link.
I changed mine for a multiple branch type of eBay great quality just use porsche gaskets. Studs etc mine were terrible but I used a mini conductor on them to heat them red hot but with no flame. They all came out with ease I put back steel ones from Design 911. If you can give each bolt a single hard hit to the top first. Have fun
thanks again folks, shall keep looking for manifolds, if its anything like the fun i had with brake fluid change, spent evenings heating and cooling nipples, last one snapped, only for friend with machine shop would have been new caliper, shall be very careful, plan sometime september, Elwyn
https://www.ebay.co.uk/itm/STAINLESS-STEEL-RACE-SPORT-EXHAUST-MANIFOLDS-FOR-PORSCHE-911-996-3-4-3-6-CARRERA/152817289332?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
i used these ,really good quality and everything lined up bob on with a full system from Topgear,Andy
thanks for your reply and sorry only thanking you now, my computer took a wobble, those manifolds look great and will watch for more to come up on ebay, unfortunately they seem to be out of stock at the moment.regards elwyn, thanks again for link
This is a source reference. Confirm exact model applicability in the original material.
