996 Carrera Group 1 – Part 2 Engine / PAGE 256
Installing bracket for oil cooler -GT3 · 7 Replacingseals.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Installing bracket for oil cooler -GT3
7 Replacingseals.
Replacethe four a-rings betweenthe bracket and oil
cooler. Insert O-ringswith grease. Push on the oil cooler
again.
Tighteningoil cooler fastening screws.8
Screw in the four oil cooler fastening screws and tighten to
9.7 Nm (7.0 ftlb.).
099_e_W
Tighteninghose clamps on the intake system.9
Insert and align the throttle body and the tuning pipe again.
Tighten the eight hose clamps.
099_d_99
This is a source reference. Confirm exact model applicability in the original material.