996 Carrera Group 1 – Part 2 Engine / PAGE 320
Installing housing for coolant guide -GT3 · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cooling
Installing housing for coolant guide -GT3
No. Procedure Instructions
Push on connecting hose.
Push on the connecting hose between the bracket for the
generator and the bracket for the oil cooler. Tighten the
hose clamp. Tighten the lower hose holder to 9.7 Nm
(7.0 ftlb.).
8 Install air-conditioningcompressor.
Place the air-conditioningcompressor onto the bracket for
the generator again. Connectelectrical connectionsagain.
Screw in the three fastening screws and tighten to 23 Nm
(17 ftJb.).
9 Install hydraulic pump,
Place the hydraulicpump with connected wires onto the
bracket for the generator again. Tighten the four fastening
screws.
M8 screw to 23 Nm (17 ftlb.)
M6 screw to 9.7 Nm (7.0 ftlb.)
Push on belt pulley and position the three fastening screws
19550012
19 -63
This is a source reference. Confirm exact model applicability in the original material.