27 22 19 Removing and installing generator · 1. Disconnectthe battery and cover terminal or 7. Undo right fastening scr

911 Carrera (996) Starter, power supply, cruise control 27 22 19 Removing and installing generator Removal 1. Disconnectthe battery and cover terminal or 7. Undo right fastening screw (with deflection battery. Undo the fastening screw for the air roller) by three turns. A gentle tap on the cleaner housing and the hose clamp on the fastening screw loosensthe threaded bushing throttle body. in the generator arm (use aluminiummandrel). Unscrewfastening screw and remove with 2. Disconnectthe electrical plug connection on deflection roller. the air flow sensor and remove the complete air cleaner assembly. 8. The generator must be turned clockwise so that the swivel arm is near the crankcase and 3. Relievethe drive belt at the tensioning pulley the holding arm projects beyond the fastening and remove the belt. eye. 4. Disconnectthe electrical plug connection on 9. Carefullypull the generator back a little and the vacuum switchover valve and unclip the undo the electrical connections,or press the switchover valve from the holder. plug connectionto the generator housing, release (arrow A) and pull oft. Pull out 5. Undo the holder at the intake distributor generator to the rear. (2 screws) and remove. Pay attention to the sealing ring (vacuum line for brake booster) when removing. - "" .JA IV ~ ~- ~ I-~~ / ~-= \"-.J !~ ..."" \'\ 095_97 \. 7//d;~~::=::\ 094_97 6. Undo left fastening screw (in direction of travel) and unscrew. 27 22 19 Removing and installing generator 27 -3 Printed in Germany -34, 1997 996271 ~~'H