Starter, power supply, cruise control 911 Carrera (996) · Installation Tool for ho

Starter, power supply, cruise control 911 Carrera (996) Installation Tool for holding the free-wheel pulley Tightening torques: For Carrera 996 (manual transmission only) from engine No. 66 Y 03208 Hexagon nut a/f24 M16xl.5 Use an aff 17 multiple-toothadapter to hold the free-wheelpulley. Hexagon-headbolts MID Nf 17 multiple-toothadapter: see Workshop EquipmentManual,chapter on commercially Hexagon nut aft 13 M8 availabletools, No. 32-1. Note When carrying out installation, make sure that the sealing ring for the vacuum brake booster is replaced and carefullyfitted. Undoing and tightening the belt pulley Note The belt pulley can be undone and tightened using a standard commerciallyavailabletool. Tools: double offset ring wrench aff 24, 27220001 screwdriver insert for internal serration screw aff 10, cross handle and torque wrench. Note The hexagon nut a/t 24 must be countered with Counterwith a double ring wrench when the ring wrench during tightening. The shaft is tightening with the aft 17 multiple-toothadapter tightened to the prescribed tightening torque The shaft is tightened to the prescribed ot 65 :!: 5 Nm (48 :!: 3.5 ftlb.) using the tightening torque of 80 :f: 5 Nm screwdriver insert and the torque wrench. (59 :f: 3.5 ftlb.) using the screwdriver insert (aft 10 internal serration screw) and torque wrench. 27 -4 272219 Removing and installing generator 996271 Printed in Germany -34, 1997