996 Carrera Group 2 Fuel, Exhaust, Engine Electronics / PAGE 69
27 84 19 Removing and installing cruise-control actuator · Note 5. Loosen
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Starter, power supply, cruise control
27 84 19 Removing and installing cruise-control actuator
Note 5. Loosen adjusting piece at cruise-control
actuator (bayonetlock) and disengage The cruise-controlactuator is fastened with
cruise-controlcable. three screws to the pedal bearing block above
the accelerator.
y D
~ 0
~..
~
213 -96 n
212 -96
A -New snap ring
1. Removeair guide and footwell air vent of the
B -Adjusting piece heating and air conditioning system. Remove
brake-lightswitch from pedal bearing block.
C -Threaded part
2. Only loosenfasteningscrewson the cruise- D -Cruise-control actuator
controlactuator.
3. Draw cruise-controlactuator to the rear and
extract to the side. Disconnectthe electrical
plug connection.
4. Loosen snap ring at adjusting piece (displace
it) and push threaded part through along with
cruise-controlcable.
27 84 19 Removing and installing cruise-control actuator 27 -5
Printed in Germany, 1997 996271
~
This is a source reference. Confirm exact model applicability in the original material.