No. Designation Qty. Removal Installation · 27 Synchronisingring 1 Mark for

Note: No. Designation Qty. Removal Installation 27 Synchronisingring 1 Mark for refitting Check for wear. Fit with the same gear wheel. Drivers must engage in the cut-outs on the coni- cal ring gearwheel.The nubsface the driver dogs 28 Taperedring Mark for refitting Fit with the same gear wheel. Lugs must engage in the cut-outson the loose gearwheel 29 Friction ring 1 Mark for refitting Fit with the same gear wheel 30 Loose gearwheel(2nd gear) 1 31 Needlebearing 1 Mark for refitting Fit with the same gear wheel 32 Inner race 1 Mark for refitting. Pull off Fit with the same gear via fixed gearwheelNo. 34 wheel. Heatto approx. 120°C 33 Thrust plate 1 34 Fixed gearwheel(3rd gear) 1 Large collar faces thrust plate No. 33 35 Spacer sleeve 36 Hexagonnut Tightento 25 Nm (19 ftlb.) 37 Hexagon-headbolt 6 Tighten to 25 Nm (19 ftlb.) 38 Tensioningplate with gear 1 See rage 34 -221 set* 39 Adjusting shim (S3) x Note the quantityand thick- Remeasureif necessary nessfor reinstallation 40 Screw plug 4 Tightento 12 Nm (9 ftlb. 41 Spring 4 42 Ball 4 34 -220 34 35 37 Disassembling and assembling transmission GT334217 Printed in Germany -29, 1999 11