No. Designation Qty. Removal Installation · 43 Oval-headscrew 2

Note: No. Designation Qty. Removal Installation 43 Oval-headscrew 2 Tightento 10 Nm (7.5 ftlb.) 44 Guidetube 45 Shaft seal 1 See ServoNo. 35 50 19 Install only after fitting the gear set 46 Transmissionhousing 1 * If the differential is still installed,the locking pieces (Nos. 40, 41, 42) must be taken out before the shift rods (Nos. 4, 6, 20) and tensioningplate (No. 38) can be removed. Note As the bearing inner races (Nos. 10, 19 and 32) are subject to tolerances (transitionfit), they could have a loose or tight fit on the shaft. 34 35 37 Disassembling and assembling transmission 34 -221 Printed in Germany -29, 1999 GT334217