996 Carrera Group 6 Body Equipment, Exterior / PAGE 28
Sliding roof 911 Carrera (996) · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Sliding roof 911 Carrera (996)
No. Procedure Instructions
6 Open sliding roof panel Open sliding roof panel approx. 80 mm. Pull trim
of sliding/tilting roof forward until the left and right-hand
drivers engage. Close sliding roof panel.
Functiontest: The trim of the sliding/tilting roof lies againstthe rear of
the sliding roof panel in tilting position. Close sliding roof
panel. The trim of the sliding/tilting roof must lie against
the clamping frame of the roof lining on the front, right
and left with a slight degree of pre-tension.The trim of
the sliding/tilting roof must not lie againstthe rear cross
bar of the roof lining. A gap of approx. 0.5 mm (cheque
card thickness) must be left.
Do not leave a gap from the rear cross member and
the roof lining in vehicles with a fully coated (flocked)
clamping frame.
60 -6 60 40 19 Removing and installing sliding roof panel
996601 Printed in Gennany -17, 1998
This is a source reference. Confirm exact model applicability in the original material.