Procedure Instructions · 3 Fasteningholding strap of the convert

Procedure Instructions 3 Fasteningholding strap of the convertible-topcovering. Position holding strap at the right on convertible-top frame 3 on the inside and press in the clip. On the left side, the holding strap is fastened with the fastening clip of the wiring harness. 4 Fasteningthe convertible-topcovering at the sides of the roof frame. Lay the convertible-topcovering to the front and guide the aluminiuminset plate into the roof frame from above. Fastenthe convertible-topcovering with 84.8 x 19 sheetmetal screws, starting from the rear bottom side of the roof frame. Fastening convertible-topcovering at the front (convertible top unlocked), A cardboard strip and a self-adhesivestrip are affixed at the front of the convertible-topcovering. Pull the protective paper off the adhesivetape and fold the convertible-top material around the roof frame edge without wrinkles. The fold is initiallyheld with fixing clips. 61 28 55 Replacing convertible-top covering 61 -37 Printed in Germany -33, 1999 9966123 No.