11. "Please confirm input" appears on the screen. Check the input · and press the F7 key to confirm the input.

911 Turbo (996) Alarm system I 48 96 11. "Please confirm input" appears on the screen. Check the input and press the F7 key to confirm the input. 12. Distinguish between loss and fault and additional hand-held transmitter for the radio code. 12 Teaching an additional hand-held transmitter: a) Select the same position (1 to 4) as for the transponder key and press the F8 key. 12 Teaching in the case of a lost or faulty hand-held transmit- b) ter: In this case, it is first necessary to identify and delete the stored "radio code" of the lost or faulty hand-held transmit- ter. The remaining hand-held transmitters are required for this purpose. Press the locking button on the hand-held transmitter and then insert the vehicle key into the ignition lock, switch on the ignition and re-establish communication with the control module. The radio of the hand-held transmitter with which the vehi- cle was last unlocked is displayed under "Current radio code". Compare this radio code with the radio codes at positions 1 to 4. This comparison allows the position of the lost hand-held transmitter (radio code) to be identified, as one radio code is ultimately left over at positions 1 to 4. Insert the vehicle key equipped with the new hand-held transmitter into the ignition lock and switch on the ignition. Establish communication with the control module. Select the identified position with the arrow keys ∧ and ∨ and delete the radio code with the F3 key. Then press the F8 key. 13. Carefully input the 24-digit code number with the arrow keys ∧ and ∨ press the double arrow key >> . 14. "Please confirm input" appears on the screen. Check the input and press the F7 key. 15. Now the handheld transmitter is taught. Go back to the menu item "Learning function", remove the key and switch on the igni- tion again. Once the key has been removed again, the hand- held transmitter is ready for use. Check handheld transmitter for operation. Reading out and transferring remote control General When replacing the alarm system control module, it is possible to read out remote controls from the old control module and transfer 9601 Control module function 96-5 page 11 Printed in Germany – 4, 2001 sgf_xi48