Alarm system I 48 911 Turbo (996)96 · them to the new control module. In this way, the hand-held transmit-

Alarm system I 48 911 Turbo (996)96 them to the new control module. In this way, the hand-held transmit- ters (remote controls and transponders) can be retained. In other words, it is not necessary to change the hand-held transmitter when replacing the alarm system control module. Requirements • Communication can be set up between the PST2 and alarm sys- tem control module. • The remote controls and transponders are correct and func- tional. Note! ♦When the remote control is read out and transferred, only the remote control data are read out and transferred. ♦The transponder of the individual keys must be adapted to the control module. Four positions are available for this purpose in menu item "Transponder key". This function is described from step 19 onward. Work preparation The following information is required from the IPAS for reading out and transferring remote controls: ♦Key learning code ♦Immobilizer code Procedure 1. Connect PST2 to the data link connector, and switch on the ignition. 2. Switch on the PST 2, select vehicle type 911 (996) and start the automatic control module search with the double arrow key >> . 3. After a brief search, the PST2 reports: "Fault memory reading completed". 4. Select alarm system control module and press the double arrow key >> . 5. Select "Learning function" in the menu and press the double arrow key >> . 6. Select menu item ’Read out remote control’ and press the dou- ble arrow key >> . 96-5 page 12 9601 Control module function sgf_xi48 Printed in Germany – 4, 2001