Alarm system I 48 911 Turbo (996)96 · Work instruction Display O

Alarm system I 48 911 Turbo (996)96 Work instruction Display OK If not OK 3 Check wire between ♦Switch off ignition < 5 Ω Repair wiring har- alarm system control ⇒ Step 4 ness ♦Measure resistance between module and door lock → End plug A pin 15 and plug on (driver/passenger) for driver’s door lock pin 6 open circuit ♦Measure resistance between plug A pin 15 and plug on pas- senger’s door lock pin 6 ♦Measure resistance between plug A pin 35 and plug on driver’s door lock pin 5 ♦Measure resistance between plug A pin 35 and plug on pas- senger’s door lock pin 5 4 Determine which door ♦In the menu item "Input signals", Door lock barrel not ⇒ Step 6 lock is faulty select "Door lock barrel" actuated ⇒ Step 5 ♦Connect plug on passenger’s door lock 5 Determine which door ♦In the menu item "Input signals", Door lock barrel not ⇒ Step 7 lock is faulty select "Door lock barrel" actuated ♦Connect plug on driver’s door lock 6 ♦Replace door lock on passenger’s side → End 7 ♦Replace door lock on driver’s side → End 96-12 page 2 9601 Fault code 6 6xxxXI48 Printed in Germany – 4, 2001